CoP: Mock Up

I altered my initial net so the dimension were all the same. I also added a tab system so the box would have an efficient way of closing and opening.

This net fitted together but I realised the tabs needed to be attached to an alternative side as if it was attached to the front the tab wouldn't be as efficient.

Therefore I amended the positioning of the tabs to create a new net.

Labelling

I wanted to choose the colour palette of my self-branding as the palette for this project as CoP is meant to be about influences my practice. This meant I was using pulp card for the boxes cut out on the laser machine so I had to think of a way of labelling the sets. I decided on using printed sticker paper printed with the main colour of my self-branding.

 My initial idea was to place the sticker over the opening and name each set after a key word which described the form of inspiration.

However I decided I didn't want the sticker to have to be ripped in order to gain access to the tiles. So to avoid this I moved the sticker to the top of the box repositioning the text therefore to the bottom of the square. This sticker will overlap the top edge of the box.

Colour Palette Stock:

WebRep

currentVote

noRating

noWeight